These inline resistors for R&G are a simple 'plug & play' piece of kit to attach to your LED indys.

Each end of the resistor wires alreay comes with 'bullet' style connections.

If fitting a relay sounds too much, you can get one of these for each LED indicator you have fitted to slow the flash rate down to a legal speed. LED indys are know to flash too quickly, so these are required to calm them down a bit.

Each packet contains resistors for two indicators, you will need 2 packets to do all 4 indicators on your bike.

Please note
that it is important that these are mounted to a metal surface, ie chassis part to allow any heat generated by the resistor to be harmlessly dissipated. The heat may damage or discolour some plastic surfaces