|R&G Inline LED Indicator Resistors
These inline resistors for R&G are a simple 'plug & play' piece of kit to attach to your LED indys.
Each end of the resistor wires already comes with 'bullet' style connections.
If fitting a relay sounds too much,
you can get one of these for each LED indicator you have fitted to slow the flash rate down to a legal speed.
LED indys are known to flash too quickly,
so these are required to calm them down a bit.
Each packet contains resistors for two indicators,
you will need 2 packets to do all 4 indicators on your bike.
that it is important that these are mounted to a metal surface, ie chassis part to allow any heat generated by the resistor to be harmlessly dissipated. The heat may damage or discolour some plastic surfaces
Are your led micro / mini indicators flashing incorrectly?
In many cases, after fitting micro / mini indicators, you may find that the indicators flash too fast or too slow. To stop this, R&G Resistors can be fitted which should solve the problem.
Note: We highly recommend buying this product when purchasing LED micro / mini indicators in order to save any disappointment when fitting.
NO wire cutting or soldering is required, these resistors fit inline.
Not yet rated
On Order - please allow 3-4 days for delivery